::
|
On the Fire Floor:
Although our building systems will detect a fire and activate the alarm, if
you discover a fire, first call 911 then Security at 206.224.1203. If the fire
is small enough and you have been trained, extinguish the fire with a fire extinguisher.
Designate Search Monitors (assistants) to help you in an emergency. Locate Search
Monitors at each stairwell to promote safe evacuation of personnel into stairwells.
Check offices, rest rooms and conference rooms after evacuation to ensure no one
is left behind. Close all doors behind you.
Provide necessary assistance during the evacuation. If needed, use the intercom in
the stairwell and Property Management or Seattle Fire Department personnel will assist you.
When all assigned duties have been completed, proceed four floors down or as directed
by the Seattle Fire Department or Property Management.
On the Receiving Floor or Safe Refuge Area:
During a partial building evacuation, the "Safe Refuge Area" is the building elevator
lobby, located four floors down from the fire floor.
Guide evacuees onto the Safe Refuge Area floor and direct them to wait in the elevator
lobby until an announcement is made to return to your floor.
Follow your company's procedure for roll call, etc. before returning to your floor.
All tenants should familiarize themselves with guidelines recommended by the
Seattle Fire Department.
Allow the Building Management to:
Investigate the alarm location prior to arrival of the Seattle Fire Department.
Escort the Seattle Fire Department to the alarm location and assist in the investigation.
In the event of an actual fire, the Seattle Fire Department will assume control of
the incident and direct tenants and management accordingly.
Reset the fire alarm system and make a building-wide announcement after the "All Clear"
has been given by the Seattle Fire Department.
|
|
|
